Notice:

1. This software does not come with Keygen, and we do not sell Keygen!

2. Please turn off anti-virus software and firewall before installing the software. The software prompts to upgrade, please click "No"!

3. One activation can only be used on one computer. If you change the computer, you need to purchase the software again. One order can only be activated once!

Software Activation Method:

1. After placing an order, please contact us and leave your email address, and we will send the software to you.

2. Put these two compressed files in a folder, then unzip these two files, run GET-ID V12.7 after unzipping, and then copy the obtained ID to me, I will activate an authorization file DAT file and send it back to you, you put it in this folder, replace the previous file, and the software activation is completed. Note: Do not connect to the network during activation and use.

12.7.0 (22.01.2025)

- Support for for G-M BOS-CH EDC17CP18

12.6.0 (13.12.2024)
- Support for Suzu-ki BOS-CH MED17

12.5.0 (31.10.2024)
- Support for Suzu-ki BOS-CH EDC17

12.4.0 (15.09.2024)
- Support for Ford BOS-CH MED17.2

12.3.0 (26.07.2024)
- Support for Ford BOS-CH EDC17C10

12.2.0 (06.06.2024)
- Test Support for Ford CONTI-NENTAL SID206

12.1.0 (27.04.2024)
- Support for Ford BOS-CH EDC17C70

12.0.0 (18.03.2024)
- Support for Toyota BOS-CH ME17.9.5x

11.9.0 (07.02.2024)
- Support for Honda BOS-CH MED17.9.3

11.8.0 (28.12.2023)
- Support for Ford BOS-CH EDC17CP42

11.7.0 (16.11.2023)
- Support for Hyundai Kia KEFICO CPEGD2

11.6.0 (10.10.2023)
- Support for Renault CONT-INENTAL SID310

11.5.0 (31.08.2023)
- Support for Bentley BOS-CH ME7.1.1

11.4.0 (23.07.2023)
- Support for PSA SIEM-ENS SID803A (full files only)

11.3.0 (17.06.2023)
- Support for Ford BOS-CH MD1CP006

11.2.0 (17.04.2023)
- Support for FCA CONTIN-ENTAL GPEC2

11.1.0 (03.03.2023)
- Support for Smart BOS-CH ME17.7 and ME17.9.20

11.0.0 (26.01.2023)
- Support for PSA DEL-PHI DCM7.1

10.9.0 (05.01.2023)
- Support for Toyota BOS-CH ME7

10.8.0 (30.11.2022)
- Support for Ford BOS-CH MD1CS005

10.7.0 (28.10.2022)
- Support for BPCM (BMS) modules used by Fiat
- Support for BPCM (BMS) modules used by Porsche

10.6.0 (22.09.2022)
- Support for MB BOS-CH MD1CS006

10.5.0 (30.08.2022)
- Support for some of the BOS-CH MD1CS006
used by FOR Renault, FOR Dacia, for Nissan and for Fiat

10.4.0 (23.07.2022)
- Support for BMW EDC15C4

10.3.0 (20.06.2022)
- Support for MB BOS-CH MD1CP001

10.2.0 (13.06.2022)
- Custom function fast buttons added
- Fixed minor bugs caused by optimization

10.1.0 (16.05.2022)
- Code and resources optimisation

10.0.0 (30.04.2022)
- Changed activation system and visual arrangement

9.9.0 (27.12.2021)
- Support for VAG Magneti Marelli IAW9GV

9.8.0 (11.11.2021)
- Support for VAG BOS-CH MD1CP004

9.7.0 (29.10.2021)
- Support for BMW BOS-CH MD1CS001

9.6.0 (26.10.2021)
- Support for BMW BOS-CH MD1CP002

9.5.0 (18.10.2021)
- Support for VAG CONTIN-ENTAL SIMOS18

9.4.1 (01.09.2021)
- Support for FCA BOS-CH ME7.9.10

9.4.0 (31.08.2021)
- Support for FCA BOS-CH ME7.3.x

9.3.0 (14.06.2021)
- Support for BEN-Z DEL-PHI CRD3

9.2.0 (12.06.2021)
- Support for Iveco BOS-CH EDC16C39

9.1.0 (09.06.2021)
- Support for MAN BOS-CH EDC7C32

9.0.0 (04.06.2021)
- Support for some of for G-M ACDelco E84

8.9.0 (31.05.2021)
- Support for some of for G-M ACDelco E98

8.8.0 (09.05.2021)
- Support for Hyundai Kia BOS-CH EDC16

8.7.0 (02.05.2021)
- Support for Chery BOS-CH ME7

8.6.0 (14.04.2021)
- Support for Hyundai for Kia BOS-CH EDC17

8.5.0 (21.03.2021)
- Support for most of for G-M ACDelco E78

8.4.0 (09.03.2021)
- Support for VAG SIEM-ENS SIMOS3
I recommend rea-d/wr-ite ecu in boot mode
to make sure, that all changes will be applied.

8.3.0 (04.03.2021)
- Support for most of for G-M ACDelco E83

8.2.0 (01.03.2021)
- Support for some of for G-M ACDelco E87

8.1.0 (21.02.2021)
- Support for FCA for Magneti for Marelli IAW7GF

8.0.0 (03.02.2021)
- Support for PSA SIEM-ENS SID208

7.9.0 (24.01.2021)
- Support for Jeep BOS-CH EDC16CP31

7.8.0 (04.01.2021)
- Support for Mercedes BOS-CH EDC16

7.7.0 (22.12.2020)
- Support for Fiat Magneti Marelli MJD9DF

7.6.0 (20.12.2020)
- Added support for Fiat for Magneti for Marelli MJD8Fx

7.5.0 (15.12.2020)
- Support for Maserati BOS-CH ME7.3.2

7.4.0 (29.11.2020)
- Support for PSA BOS-CH ME7.4.x

7.3.1 (20.11.2020)
- Support for all reported for VAG BOS-CH ME7

7.3.0 (08.11.2020)
- Support for PSA BOS-CH EDC17C10
- Support for some for Smart BOS-CH BMS modules

7.2.0 (02.11.2020)
- Support for PSA BOS-CH EDC17C60
- Rebuilded ECU type auto detection for EDC17

7.1.0 (31.10.2020)
- Support for Hino BOS-CH EDC17C01
- Update for Isuzu to work with some EDC17C09

7.0.0 (29.10.2020)
- Support for Isuzu BOS-CH EDC17CV41

6.9.0 (18.10.2020)
- Support for PSA BOS-CH EDC16CP39

6.8.1 (14.10.2020)
- Support for Opel Magneti Marelli MJD6Ox
- Fixed for Mercedes MED17 to support other file sizes

6.7.0 (11.10.2020)
- Support for Ford BOS-CH EDC17CP05

6.6.0 (02.10.2020)
- Support for Fiat for Magneti for Marelli MJD6F3

6.5.0 (28.09.2020)
- Support for BMW SIEM-ENS MSS65

6.4.0 (27.09.2020)
- Support for Renault for Valeo V42

6.3.0 (18.09.2020)
- Support for Mercedes BOS-CH EDC15C6

6.2.0 (06.09.2020)
- Warning, that update is needed
- Folders in exported a2l file
- New layout

6.1.0 (04.09.2020)
- Added export to a2l file
for test only, work with most MEDC17

6.0.0 (23.08.2020)
- Support for PSA BOS-CH MD1CS003

5.9.0 (19.08.2020)
- Support for BMW SIEM-ENS MS43

5.8.0 (31.07.2020)
- Support for FCA BOS-CH ME(D)17

5.7.1 (27.07.2020)
- Added sorting of error codes list with F11

5.7.0 (26.07.2020)
- Support for Land Rover BOS-CH EDC17

5.6.0 (21.07.2020)
- Support for Suzu-ki Denso 32bit gasoline ECU

5.5.0 (19.07.2020)
- Support for Dodge BOS-CH EDC17C79

5.4.0 (05.07.2020)
- Support for VAG BOS-CH EDC15P and some EDC15V

5.3.0 (28.06.2020)
- Support for Honda BOS-CH EDC17

5.2.0 (23.06.2020)
- Support for Hyundai for Kia BOS-CH M7.9.8

5.1.0 (22.06.2020)
- Support for VAG SIEM-ENS PPD
work only with BDM (full) files

5.0.0 (20.06.2020)
- Program build from scrach on new programming platform.
- Is stable, "fast" and support long filenames.
- All ECU types have active error list window.
- You can copy error list to the clipboard by taping F12.
- You can select and delete error from the list directly.
- You can load error list txt file and delete many errors
with one click, just create txt file with codes, that
you want remove, separated with dot, coma or space,
load txt file to the program, after that load ECU file
and all listed errors codes will be disabled.
- Update to support files reported as not working.
(some for MB MED17, for Mini MED17, for Opel MT35,for PSA SID807)

4.3.0 (23.04.2020)
- Support for Mercedes DEL-PHI CRD2
- Decoding Bxxxx codes stored in some files.

4.2.0 (21.04.2020)
- Support for VAG SIEM-ENS SIMOS7

4.1.0 (16.04.2020)
- Support for Opel Vauxhall BOS-CH ME7.6.x
- Added error code confirmation with enter key
- Added drag n drop

4.0.0 (14.04.2020)
- Support for Renault for Nissan SIEM-ENS SID307

3.9.0 (13.04.2020)
- Support for Renault for Nissan SIEM-ENS SID305

3.8.0 (11.04.2020)
- Support for Renault for Nissan SIEM-ENS SID301

3.7.0 (10.04.2020)
- Support for Subaru DENSO 2.0 DIESEL

3.6.0 (08.04.2020)
- Support for Porsche CONTIN-ENTAL SDI3 - SDI9

3.5.0 (07.04.2020)
- Support for Volvo BOS-CH EDC17

3.4.0 (06.04.2020)
- Support for Ford BOS-CH MED17.2.2 (MEDG17.0)

3.3.0 (03.04.2020)
- Support for Nissan HITACHI with SH705x

3.2.0 (02.04.2020)
- Improved for VAG EDC17 - now should work will all

3.1.0 (25.03.2020)
- Support for Porsche BOS-CH ME7

3.0.0 (24.03.2020)
- Support for VAG DEL-PHI DCM6.2
- Revised for VAG DEL-PHI DCM3.7

2.9.0 (23.03.2020)
- Support for PSA DEL-PHI DCM6.2

2.8.0 (22.03.2020)
- Support for part of VAG EDC17
- should work with CP04 CP14 CP20 CP44 U01 and U05

2.7.0 (21.03.2020)
- Support for Mini MEV17.2.2

2.6.1 (10.03.2020)
- Fixed bug in for Hyundai DCM3.7 - work with more variants

2.6.0 (03.03.2020)
- Support for Hyundai for Kia DEL-PHI DCM3.7

2.5.0 (02.03.2020)
- Support for PSA Fiat BOS-CH EDC15

2.4.0 (29.02.2020)
- Support for Chevrolet SIEM-ENS SIRIUS D42

2.3.0 (21.02.2020)
- Support for Mercedes CONTIN-ENTAL SIM266

2.2.0 (04.02.2020)
- Error codes list added to selected ecu types

2.1.0 (02.02.2020)
- Support for Opel BOS-CH ME1.5.5
- First implementation of error codes list

2.0.0 (27.01.2020)
- Support for Smart BOS-CH ME7.7.0

1.9.0 (26.01.2020)
- Support for PSA CONTIN-ENTAL SID807

1.8.0 (24.01.2020)
- Support for Ford CONTIN-ENTAL SID807

1.7.0 (24.01.2020)
- Support for Ford CONTIN-ENTAL SID208

1.6.0 (24.01.2020)
- Support for Ford DEL-PHI DCM3.5

1.5.0 (19.01.2020)
- Support for Volvo BOS-CH EDC16c31

1.4.0 (12.01.2020)
- Support for Volvo BOS-CH EDC16c34

1.3.0 (10.01.2020)
- Fixed bug in for PSA DCM3.5 - work with more variants

1.2.0 (04.01.2020)
- Improved for Mer-ce-des MED17 - work with obd readouts

1.1.0 (03.01.2020)
- Improved for Mer-ce-des EDC17 - work with obd readouts

1.0.0 (02.01.2020)
- New name and look with more space and functions
- New id algo with support of NVMe hard drives

Currently only part of the files will be supported, SID206 is complicated and it doesn’t really work with any other program.

I need more files to work with and not all files are suitable, full BDM files or PCM-Flash OBD readouts are OK.

Files that weigh about 50KB after packing are empty inside, are not suitable for any work and will be not supported for sure