MUCAR VO8 Bi-Directional Scan Tool OEM Full Systems OBD2 Scanner Diagnostic Tool

[ ✅ Newest + Smartest + Fastest Automotive Scan Tool]💎 MUCAR VO8 Professional Version ➤ 2 Years Free Update ➤ Functional Tests & Bi-Directional Controls➤Flash Hidden Functions➤[AutoAuth for FCA SGW]Works with Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017➤Setting & Changeover (adblue reset, unlock the engine after a collision, cancel ABS driving test, and more) for Benz ➤Modification for BMW ➤Offline Coding ➤Customization ➤Personalization, and keep growing.

[Bi-Directional + ECU Coding & Replacement + 34 Services + Adaptation + Initialization + Matching ]MUCAR VO8 car diagnostic scanner tool support ECU Coding to quickly match, learn, code any replaced ECU. Modify ECU and reveal hidden features for 99% cars in the market. Adaptive data for certain components after repairs or replacements.

[OEM Full System Diagnostics + Quick Update Frequency]The MUCAR VO8 obd2 scanner diagnostic tool can perform OE-level diagnosis and analysis on all available systems: ECM, TCM, ABS, SRS, BCM, BMS, TPMS, and A/C system, etc. Through reading/erasing codes, viewing live data, retrieving ECU info, and performing active tests & service functions, MUCAR VO8 evaluates the car’s health status for 20K+ models. With quick update frequency, you can update it once a week to cover newer models.

[Actuation Test + Bi-Directional Contorl]This MUCAR VO8 bidirectional scan tool can output commands to a vehicle’s ECUs, read the ECU data, and monitor the operation of the actuators. Through active tests on certain components, such as fuel pumps, a/c fan, inside mirrors, headlamps, windows, and horns, this bidirectional scanner will let you quickly know whether a specific system, component, or subsystem is functioning properly or not, helping you locate the car issues precisely.

[34 Resets + 10 High-End Functions]The 100% original MUCAR VO8 scanner for car provides 34+ reset functions for mechanics to do daily auto maintenances in workshops, such as Oil Reset, TPMS Reset, IMMO, ABS Bleeding, Injector Coding, Throttle Adaptation, Gear Learning, Suspension Reset, Seats Calibration, etc. ➤You will get 10+ high-end functions if you enter the "Diagnostic Report" page, "system" and then "special" functions.

[Cover 20K+ Cars + 28 languages ]Over 100,000 Vehicles Coverage + Almost ALL OBDI&OBDII Connectors and Cables Included]VO8 car scanner works on most OBDII-compliant vehicles worldwide in US, Europe, Asia, Africa, and Australia for 12V cars, SUV, light truck, hybrids, and even roadster. All connectors and cables included help you easily read different car models without encountering any sort of communication barrier.

What are the Difference of MUCAR VO8 MUCAR VO7 MUCAR VO6?

Support Auto Auth for FCA SGW Access
The vehicles with security gateways are mainly the following vehicles: Chrysler series, Maserati series, Fiat series, Renault series, Nissan series, Mercedes-Benz series, Volkswagen series.

Without unlocking the security gateway, you can only read fault codes, read data streams, and read version information. You cannot clear fault codes, and there are no special functions, etc. After unlock FCAalso supports special functions such as action testing, maintenance reset, key matching, etc.

 

THINKCAR has cooperated with FCA. You only need to purchase AUTHENTICATED DIAGNOSTICS of FCA on the THINKCAR official website, and you can directly use THINKCAR device to diagnose Chrysler (Included brands Abarth, Alfa Romeo, Chrysler, Dodge, Fiat, Fiat Professional, Jeep, Lancia, Maserati, and Ram Trucks) vehicles using advanced diagnostic functions.

THINKCAR European FCA Purchase:www.thinkcar.com

Remarks: Only for European region. For the United States users, please unlock FCA from AutoAuth.

1. Enter the official website and click "Explore"

2. The menu bar appears, click "FCA"

3. 128USD/year

 

Use Chrysler 12+8 adapter to Unlock Gateway for Vehicle brands below:

2018 and later Chrysler: 300, Grand Voyager

Dodge: Challenger, Charger, Durango, Journey, Ram 1500, Ram 2500, Ram 3500, Ram 4500, Ram 5500

JEEP: Grand Cherokee, Renegade, New Wrangler (JL), Grand Commander

2019 and laterJEEP: Cherokee, Compass

2020 and laterJEEP: Gladiator

2018 and laterAlfa Romeo: GIULIA

Fiat: 500L, 500X, 500, Novo Uno fl, Toro

2018 and laterMaserati series

 

Note: 12+8 menu prompts, there are no English prompts, only the entrance to log in to FCA in English.Currently, only a few languages such as Simplified Chinese, Traditional Chinese, Korean, and Japanese have 12+8 prompts. Other languages do not have them. There is no detailed statistics. The specific details are subject to actual use.

 

Nissan Series

B18 chassis Nissan models (14th generation Nissan Sylphy, Sentra)

Currently, you need to use Nissan 16+32 adapter cable to release the security gateway module.

The car may involve the security gateway. Try the following: Turn off the ignition switch, then turn it back on. Press the accelerator twice within 10 seconds, then perform calibration.

 

Mercedes-Benz W206 W223 chassis vehiclesC series/S series models after 2020

There is no need to purchase an account or any physical method. The main thing is software authorization, and the main thing is that the equipment hardware needs to support the DOIP protocol. The DOIP protocol requires the manufacturer's authorization, but it is not enabled on the English version of the software. Without authorization, if customers want to diagnose these models, they must switch to other languages for diagnosis. Japanese, Korean, Traditional Chinese, and Simplified Chinese are all acceptable.

 

Volkswagen Series

2020~2023 Golf 8

2021~2023 Land Cruiser

2021~2023 Land Cruiser

2022~2023 Lingdu L

2022~2023 New Weiran

ID.4 CROZZ, ID.6 CROZZ

ID.3, ID.4X, ID.6X

 

Audi Series

2020~2023 Audi A3L

Q2 e-tron, Q4 e-tron, Q5 e-tron

 

Skoda Series

2021~2023 Octavia PRO

 

The above models are equipped with Volkswagen SFD security gateway module, which needs to be unlocked for diagnosis. The diagnostic software has a login entrance. If the customer has a token code, it can be unlocked.

 

Renault/Dacia Gateway Unlock

The online gateway function of Renault models is similar to that of FCA. They are both online security gateways. If they are not unlocked, only read operations (reading fault codes, data streams, version information, etc.) can be performed, and write operations (clearing codes, setting codes, programming, etc.) cannot be performed. Renault online gateway unlocking is to temporarily unlock the vehicle using the software provided by the Renault original factory. After unlocking, the fault diagnostic instrument can be used on the Renault car to perform write operations: such as action testing, programming, setting codes, anti-theft and initialization functions.

 

Support 109 Car Brands 2000+ vehicle, 28 Languages

Support English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovak, Chinese Traditional, Korean, Turkish, Czech,Romanian, Slovenian, Croatian, Persian, Serbian, Danish, Bulgarian, Vietnamese,Finnish,Slovenian

OE Level All System Diagnostic

MUCAR VO8 has the ability to access all available system and subsystems codes, and perform a comprehensive scanning on ECUs: Engines/Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip coding/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics, etc.

It supports the detailed Function :

--read fault codes: read and decode the DTCs to identify where the fault location is;
--clear fault codes: erase the DTCs to turn off the MIL after repairs;
--retrieve ecu information: allows you to retrieve vehicle information;
--Graph live data stream: view the dynamic data stream to determine vehicle condition

With the Diagnose Function , you can enhance performance, save energy, reduce emissions and more as following:

For Engine: detect common issues as Poor lubrication, Failing oil pump, Oil deposits and debris, Inadequate fuel and air compression, Leaking engine coolant, Blocked engine radiators, Prolonged engine detonation, Damaged oxygen sensors, Aged spark plugs, etc.

For SRS: pinpoint the trouble area as: a bad seat belt, a corroded crash sensor, or some water intrusion in a connector, etc.

For ABS: diagnose Blown sensor fuse, Low brake fluids, and Faulty sensor, etc.

For Transmission: avoid Grinding or shaking sensation in gear, Whining, humming or clunking noises, Burning smells, Gears Slipping, Low or Leaking Transmission Fluid, etc.

For TPMS: verify problems of Low tire pressure, Faulty in tire pressure monitor control module, Unknown tire sensor, Failure to identify tire sensor, etc.

Actuation Test & Bi-directional COntrol

Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators.You can test whether the execution components work normally by bi-directionally monitoring the operation actuator.

ECU Coding

MUCAR VO8 car diagnostic scanner tool support ECU Coding to quickly match, learn, code any replaced ECU. Modify ECU and reveal hidden features for 99% cars in the market. Adaptive data for certain components after repairs or replacements.

✔ ECU Coding: Helps re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.

After we replace ECU modules, defective units, or certain parts we need to do the coding to make the replaced parts being stored and recognized by the ECU. Follow the strict procedures of the manufacturer to match, learn, code, and program it until it functions normally. Warm Tips: Before coding, please read and record the original module’s information.

✔ ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.

✔ ECU coding helps to flash some hidden features for vehicles and disable the car’s annoying functions. such as changing the interior light, activating cornering headlights with fog lights, and deactivating buzzing sounds when locking the door, etc.

34 Maintenance Function

1. Oil Reset: reset the oil life system and turn off the oil light after oil or oil filter replacements.

2. EPB: reset the brake pad after replacing the brake pad, the servo motor, etc., deactivate/activate the brake control system, assist with brake fluid control, open and close brake pads, etc.

3. TPMS: reset the tire pressure and turn off the tire pressure fault indicator.

4. BMS: reset the monitoring unit of the car battery after replacing the battery or battery monitoring sensors.

5. DPF Regeneration: clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.

6. IMMO Keys: disable the lost vehicle keys and program the replacement key fob. ONLY For some Asian and American cars with low-grade IMMO.

7. Injector Coding: write the actual code of the fuel injection nozzle or rewrite the code in the ECU to the code corresponding to the fuel nozzle of each cylinder after replacing the ECU and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder.

8. SAS Calibration: calibrate the steering angle after replacing steering-related parts.

9. Suspension Level Calibration: adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.

10. Throttle Adaption: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.

11. Sunroof Initialization: initialize the sunroof data to set the sunroof to lock off, close in rain, memory function of sliding/tilting sunroof, outside temperature threshold, etc.

12. Seats Calibration: specially designed for the seats with memory functions. Match the seat after repairing or replacing the seat.

13. ABS Bleeding: Help exhaust the air.

14. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.

15. Gear Learning: Monitors certain camshaft position sensors signals.

16. Tire Reset: Set the size parameters of the modified or replaced tire.

17. A/F Reset: Set or learn Air/Fuel ratio parameters.

18. Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

19. Coolant Bleeding: Activate the electronic water pump.

20. Nox Sensor Reset: Reset catalytic converter learned value stored in ECU.

21. ODO Reset: Copy, write or rewrite the kilometer value, only few cars compatible, check with seller compatibility.

22. SRS(Airbag Reset): Resets the airbag data to clear the airbag collision fault indicator.

23. Transport Mode: Deactivate the transport mode.

24. Windows Calibration: Perform door window matching to recover ECU initial memory.

25. Language Change: Change vehicle system language.

26. EGR Adaption: Learn the Exhaust Gas Recirculation valve after being cleaned.

27. Stop/Start Reset: Set up the automatic start-stop function in ECU.

28. AFS Headlamp Reset: Initialize the adaptive headlamp system.

29. Motor Angular Position Sensor Calibration.

30. Engine Power Balance.

31. High Voltage Battery Health Check.

32. Smart Cruise Control Calibration.

33. GPF Regeneration.

34. Automatic Air Conditioning Initialization.

Attention !!!

NOT ALL Reset Services work for All Car Models. Please contact seller with the vehicle Make/Model/Year/Vin before purchase to make sure the desired functions are compatible with your cars, which won't waste your time!!!

All in One Diagnostc Tool

Real Live Data Stream
Automatic Read VIN(12V)
Lifetime Free Upgrade for all cars softwares
Remote Technical support
Fast Printing Diagnostic Report

Support 20K+ Car Coveage, 28 Languages

20K+ Car Coveage + LIFETIME FREE Update Online

For Amarica car models —— FORD,LINCOIN,GM,BUICK,CADILLAC,CHEVROLET,CHRYSLER,DODGE,JEEP,HM

For Europe car models —— BENZ,SMART,SPRINTER,BMW,VW,SKODA,AUDI,OPEL,LAMBORGHINI,PORSCHE,MAYBACH,EURO FORD,LANDROVER,DR,BENTLEYRollsRoyce,ROVER,MINI,VAUXHALL,FERRARI,FIAT,Abarth,LANCIA,Alfa,Romeo,Maserati,BUGATTI,PEUGEOTCITROEN,RENAULT,SAAB,VOLVO,OPEL,Dacia,SEAT;
For Malaysia car mAakes —— PERODUA(PERODUA), PROTON;
For IRAN car makes ——IKCO, MVM, SAIPA;
For Australian car makes —— Austford, Holden ;
For India car makes ——TATA, MARUTI, MAHINDRA, India HM;
For Russia car makes—— GAZ, VAZ;
For Brazil car makes ——FIAT; GM;

For ASIAN CAR makes ——SAMSUNG,DAEWOO,SSANYYONG,HYUNDAI,KIA,HONDA,Acura,TOYOTA,SCION,LEXUS MAZDA,NISSAN,Infiniti,JPISUZU,TLISUZU,DAIHATSUSUZUKI,MITSUBISHI,SUBARU,CHANGCHENG,HUACHEN,ZHONGXING,JACTY,QIRUI_TY,ISUZU,JINLONG,CHANGAN,LIUWEI_TY,XINKAI,JPISUZU,ZHONGSHUN,HAOQING,HAFEI,XIALI,CHANGHE,ZHONGTAI,Kowloon,Brilliance,LIFAN,WEILI,FLYER,SSANGYONG,JIAO,WEILI,LUXGEN.BYD,CHERY.ZOTYE.etc.

✔ CONTINUOUSLY GROWING Vehicle Coverage WITH UPDATES

Lifetime Free Full OBD2 Functions

Read Codes—Knows what and where the problem is according to the DTC and its definition.

Clear Codes—Clear the DTCs and turn off the warning lights after code reading and certain repairs.

Live Data---Request current powertrain diagnostic data. 4 data streams can be merged in 1 graph for easier comparison.

Freeze Frame—Request freeze frame information. Find the data at the time of the car failure.
O2 Sensor Test—Request oxygen sensor monitoring test results.

On-Board Monitor Test—Request on-board monitoring test results for specific monitored systems.

I/M Readiness—Request emission-related diagnostic trouble codes detected during current or last completed driving cycle

EVAP Test—Start the leak test of the vehicle's EVAP system (This tool does not perform the leak test, but sends a signal to the vehicle's on-board computer to start the test.)

Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Specifications:

Packing List:

1* MUCAR VO8 Bi-Directional OBD2 Scanner

1* Bluetooth (VCI) Dongle

1* Carrying case

15* Connector and Adaptors

1*User Manual